Kikuo KISHIMOTO, Shigeru AOKI and Masaru SAKATA
Dynamic Fracture Mechanics Parameter Estimation for
Three-Point Bend Specimen in Large Scale Yielding
Proc. Int. Conf.on Impact Loading and Dynamic Behaviour of
Materials, 1-8 (1987)
M.SAKATA, S.AOKI, K.KISHIMOTO, T.YOSHIDA and H.FUKANO
Ductile Fracture Behavior Near Crack Tip Under Mixed Mode
Condition
Proc. Int. Conf. on Fracture and Fracture Mechanics, 54-58 (1987)
岸本喜久雄, 鈴木玄, 青木繁, 坂田勝
衝撃三点曲げ試験片におけるＪ積分の簡便評価法
機械学会論文集(A), 53, [489] 899-904 (1987)
坂田勝, 青木繁, 岸本喜久雄, 吉田勉, 深野博司
混合モ−ド荷重下における延性き裂先端の破壊挙動について
機械学会論文集(A), 53, [485] 116-121 (1987)
岸本喜久雄, 木村篤史, 青木繁, 坂田勝
引張荷重を受ける試験片への大規模降伏時におけるＪ積分の適用限界について
機械学会論文集(A), 53, [492] 1644-1650 (1987)
S.AOKI, K.KISHIMOTO, T.YOSHIDA and M.SAKATA
A Study on the Near Crack Tip Deformation of a Ductile
Material Under Combined Mode and Loading by a Finite Element
Proc. Int. Conf. on Role of Fracture Mechanics in Modern
Technology, 629-642 (1987)
青木繁, 栗田雅春, 岸本喜久雄, 坂田勝, 田谷稔
アルミニウム合金および鋼の衝撃破壊じん性Ｋ↓Id↑の測定
材料, 36, [402] 274-279 (1987)
S.AOKI, K.KISHIMOTO, T.YOSHIDA and M.SAKATA
A Finite Element Study of the Near Crack Tip Deformation
of a Ductile Material Under Mixed Mode Loading
J. Mech. Phys. Solids, 35, [4] 431-455 (1987)
Shigeru AOKI, Kikuo kISHIMOTO and Masaru SAKATA
Finite Element Computation of Dynamic Stress Intensity
Factor for a Rapidly Propagating Crack Using J-Integral
Computational Mechanics, 2, 54-62 (1987)
S.AOKI, K.KISHIMOTO, M.SAKATA and M.MIYASAKA
Application of Boundary Element Method to Galvanic
Corrosion Problem
Proc. Ist. Japan-China Symposium on Boundary Element Methods,
313-323 (1987)
青木繁, 岸本喜久雄, 宮坂松甫
ガルバニック腐食およびカソ−ド防食問題の三次元境界要素解析
境界要素法論文集, 4, 227-232 (1987)
S.AOKI, K.KISHIMOTO, M.SAKATA and M.TAYA
Measurement of Dynamic Fracture Toughness on Aluminum
Alloy and Steel
Proc. Int. Conf. on Fracture and Fracture Mechanics, 467-472
(1987)
Shigeru AOKI, et al.
Stress Intensity Factor Handbook
Pergamon (1987)
青木繁
破壊の理論
接着協会誌, 23, [3] 121-126 (1987)
青木繁
境界要素法によるガルバニック腐食及びカソ−ド防食の解析
防錆管理, 31 [4] 110-115 (1987)
Shigeru AOKI, Kikuo KISHIMOTO and Matsuho MIYASAKA
Analysis of Potential and Current Distributions Using
Boundary Element Method
J. Sci. Eng. Corrosion (NACE), 44, [12] 926-932 (1988)
吉田勉, 青木繁, 岸本喜久雄, 坂田勝
混合モ−ド荷重下におけるＪ積分の適用限界
日本機械学会論文集(A), 54, [501] 1069-1075 (1988)
Kikuo KISHIMOTO, Shigeru AOKI and Masaru SAKATA
Dynamic Fracture Mechanics Parameter Estimation for
Three-Point Bend Specimen
Impact Loading and Dynamic Behavior of Materials Vol.1, DGM
Informationsgesellschaft mbH, 129-135 (1988)
藤野陽輔, 岸本喜久雄, 青木繁, 坂田勝
両端自由衝撃曲げ試験片の動的応力大係数の簡便評価式
日本機械学会論文集(A), 54, [501] 1101-1106 (1988)
坂田勝, 青木繁, 岸本喜久雄, 藤野陽輔, 穐場享
両端自由衝撃曲げによる構造用セラミックスの高温衝撃破壊じん性の計測
材料, 37, [419] 910-915 (1988)
岸本喜久雄, 宮坂松甫, 橋本和宏, 青木繁
境界要素法によるガルバニック腐食の解析（単一領域法と領域分割法による計算精度の比較）
境界要素法論文集, 5, 85-90 (1988)
K.KISHIMOTO, T.YOSHIDA, S.AOKI and M.SAKATA
Finite Element Analysis on Hole Growth Near a Crack Tip
Under Mixed Mode Conditions
Proc. the Far East Fracture Group Workshop, 85-92 (1988)
岸本喜久雄, 竹内則康, 青木繁, 坂田勝
Ｊ積分の有限要素解析における計算精度の検討
日本機械学会論文集(A), 54, [504] 1623-1628 (1988)
Kikuo KISHIMOTO, Shigeru AOKI and Matsuho MIYASAKA
Three-Dimensional Boundary Element Analysis of Potential
and Current Density in Galvanic Corrosion
Proc. 2nd China-Japan Symposium on Boundary Element Methods,
173-180 (1988)
Kikuo KISHIMOTO, Hiroyuki MIYASAKA and Shigeru AOKI
Boundary Element Analysis of the Inverse Problem in
Galvanic Corrosion
Proc. the First Joint Japan/US Symposium on Boundary Element
Method,Pergamon Press, 453-462 (1988)
青木繁, 岸本喜久雄, 宮坂松甫
ガルバニック腐食およびカソ−ド防食における電位・電流密度分布予測
材料, 37, [418] 757-762 (1988)
青木繁
破壊力学（分担）
培風館 (1988)
青木繁
衝撃破壊および高速き裂進展の動力学−動的破壊力学−
材料科学, 24, [3] 116-124 (1988)
Shigeru AOKI
On the Mechanics of Dynamic Fracture
JSME International Journal, Series I, 31, [3] 487-499 (1988)
Masaru SAKATA and Shigeru AOKI
A Statistical Approach to Upper Yield of Low Carbon Steel
Under Non-Uniform Stress Distribution
Engng. Fract. Mech, p711-720 (1988)
S.AOKI, K.KISHIMOTO, Y.SUGA, S.TAKAHASHI and M.SAKATA
Impact Fracture Toughness Testing of Alumina and
Alumina-Zirconia Composite
Proc. Oji Int. Seminar on dynamic Fracture, 14 (1989)
T.YOSHIDA, S.AOKI, K.KISHIMOTO and M.SAKATA
Specimen Size Requirement for J Characterization under
Mixed Mode Loading
JSME Int. J., 32, [1] 38-44 (1989)
K.KISHIMOTO, N.TAKEUCHI, S.AOKI and M.SAKATA
Study on the Accuracy of ?-integral Caluculation by
Finite Element Method
Proc. Pressure Vessel and Piping (ASME), 160, 111-116 (1989)
K.KISHIMOTO, T.YOSHIDA, S.AOKI and M.SAKATA
Finite Element Analysis on Hole Growth near a Crack Tip
under Mixed Mode Conditions
2nd Int. Conf. on Computational Plasticity, 2, 1195-1206 (1989)
Masaru SAKATA, Shigeru AOKI and Kikuo KISHIMOTO
Measurement of Dynamic Fracture Toughness of Ceramic
Materials at Elevated Temperature by One-Point-Bend Impact Test
Proc. 7th Int. Conf. on Fracture (Advance in Fracture Research),
1, 827-836 (1989)
K.KISHIMOTO, T.YOSHIDA, S.AOKI and M.SAKATA
Finite Element Analysis on Ductile Fracture near a Crack
Tip under Mixed Mode Conditions
Proc. the 2nd Int. Symp. on Plasticity and Its Current
Applications (Advances in Plasticity 1989, Pergamon Press),
511-514 (1989)
岸本喜久雄, 吉田勉, 青木繁, 坂田勝
混合モ−ド荷重下のき裂先端近傍における空孔の成長解析
日本機械学会論文集(A), 55, [512] 803-810 (1989)
Shigeru AOKI, Kiyoshi KAZAWA and Kikuo KISHIMOTO
Size Requirement for Stress Intensity Factor
Characterization under Biaxial Loading
Proc. Pressure Vessel and Piping (ASME), 167, 31-36 (1989)
宮坂松甫, 橋本和宏, 岸本喜久雄, 青木繁
境界要素法によるガルバニック腐食問題の解析−−遮へい物が存在する場合の解析精度の検討−−
材料, 38, [432] 1079-1084 (1989)
Kikuo KISHIMOTO, Hiroyuki MIYASAKA and Shigeru AOKI
Boundary Element Analysis of an Inverse Problem in
Galvanic Corrosion
JSME Int.J., 32, [2] 256-262 (1989)
Shigeru AOKI, Kikuo KISHIMOTO and Tsutomu YOSHIDA
Size Requirement for J-controlled Fracture Initiation
under Mixed Mode Loading
Proc. 2nd Int. Conf. on Computational Plasticity, 2, 1195-1206
(1989)
岸本喜久雄, 天谷賢治, 青木繁, 宮坂松甫
境界要素法による腐食問題の解析（計算精度の検討およびカソ−ド防食の最適化）
境界要素法論文集, 6, 269-274 (1989)